|
|
|
National Stock Number:
5340-01-446-0608
Federal Supply Class:
5340
National Item Identification Number:
014460608
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 68A324001-2001 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 0.500 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.050 INCHES NOMINAL | | CENTER SECTION WIDTH | 1.500 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG CORNER RADIUS | 0.250 INCHES NOMINAL | | FIRST LEG STYLE | CORNER RADIUS | | FIRST LEG THICKNESS | 0.050 INCHES NOMINAL | | FIRST LEG WIDTH | 1.500 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5,T81 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 2024 | | MOUNTING HOLE TYPE | PLAIN | | SPECIAL FEATURES | ATTACHED WITH RIVETS;REQUIRES CLIP NUT IN CENTER HOLE POSITION;INTENDED FOR SUPPORT OF WIRE BUNDLES ONLY. BRACKET SAME AS PART NUMBER 9M672C2L EXCEPT HAS 3 HOLES AND CLIP MOVED TO CENTER HOLE | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | THREE HOLES | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG CORNER RADIUS | 0.250 INCHES NOMINAL | | SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 0.500 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | CORNER RADIUS | | SECOND LEG THICKNESS | 0.050 INCHES NOMINAL | | SECOND LEG HOLE DIAMETER | 0.220 INCHES MINIMUM AND 0.230 INCHES MAXIMUM | | SECOND LEG WIDTH | 1.500 INCHES NOMINAL | | STYLE DESIGNATOR | DOUBLE ANGLE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-23377 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE | | SURFACE TREATMENT | PRIMER AND CHROMATE |
|
|