| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 16.4 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 47.5 MILLIMETERS NOMINAL |
| FIRST LEG END WIDTH | 25.0 MILLIMETERS NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG ANGLE | 1.0 RADIANS MINIMUM AND 3.0 RADIANS MAXIMUM |
| FIRST LEG CHAMFER ANGLE | 16.0 RADIANS MINIMUM AND 22.0 RADIANS MAXIMUM |
| FIRST LEG LENGTH | 30.7 MILLIMETERS MINIMUM AND 33.7 MILLIMETERS MAXIMUM |
| FIRST LEG STYLE | CHAMFERED ENDS |
| FIRST LEG THICKNESS | 3.048 MILLIMETERS NOMINAL |
| FIRST LEG HOLE DIAMETER | 9.0 MILLIMETERS MINIMUM AND 9.2 MILLIMETERS MAXIMUM |
| FIRST LEG WIDTH | 93.5 MILLIMETERS MINIMUM AND 96.5 MILLIMETERS MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-A-366 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM-A-569 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 410 OR STEEL UNS K42544 OR STEEL COMP 1009 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 30.0 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 10.0 MILLIMETERS NOMINAL |
| SECOND LEG END WIDTH | 56.4 MILLIMETERS MINIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG CHAMFER ANGLE | 2.0 RADIANS MINIMUM AND 6.0 RADIANS MAXIMUM |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 75.0 MILLIMETERS NOMINAL |
| SECOND LEG LENGTH | 42.0 MILLIMETERS MINIMUM AND 45.0 MILLIMETERS MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CHAMFERED ENDS |
| SECOND LEG THICKNESS | 3.048 MILLIMETERS NOMINAL |
| SECOND LEG HOLE DIAMETER | 7.0 MILLIMETERS MINIMUM AND 8.0 MILLIMETERS MAXIMUM |
| SECOND LEG WIDTH | 93.5 MILLIMETERS MINIMUM AND 96.5 MILLIMETERS MAXIMUM |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT | PHOSPHATE ZINC OR PAINT |