| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 14.8 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 30.2 MILLIMETERS NOMINAL |
| FIRST LEG END WIDTH | 368.0 MILLIMETERS MINIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| FIRST LEG ANGLE | 6.0 RADIANS MINIMUM AND 8.0 RADIANS MAXIMUM |
| FIRST LEG CHAMFER ANGLE | 43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 134.0 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 185.0 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 138.0 MILLIMETERS NOMINAL |
| FIRST LEG LENGTH | 58.0 MILLIMETERS MINIMUM AND 62.0 MILLIMETERS MAXIMUM |
| FIRST LEG STYLE | CHAMFERED ENDS |
| FIRST LEG THICKNESS | 3.4290 MILLIMETERS NOMINAL |
| FIRST LEG HOLE DIAMETER | 9.5 MILLIMETERS MINIMUM AND 10.5 MILLIMETERS MAXIMUM |
| FIRST LEG WIDTH | 378.0 MILLIMETERS MINIMUM AND 382.0 MILLIMETERS MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-A-366 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 1009 |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 18.0 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 30.4 MILLIMETERS NOMINAL |
| SECOND LEG END WIDTH | 278.0 MILLIMETERS NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG CHAMFER ANGLE | 43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 240.0 MILLIMETERS NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CHAMFERED ENDS |
| SECOND LEG THICKNESS | 3.429 MILLIMETERS NOMINAL |
| SECOND LEG HOLE DIAMETER | 9.5 MILLIMETERS MINIMUM AND 10.5 MILLIMETERS MAXIMUM |
| SECOND LEG LENGTH | 102.0 MILLIMETERS MINIMUM AND 106.0 MILLIMETERS MAXIMUM |
| SECOND LEG WIDTH | 288.0 MILLIMETERS MINIMUM |
| STYLE DESIGNATOR | ANGLE |