| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 64.5 MILLIMETERS MINIMUM AND 65.5 MILLIMETERS MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 29.7 MILLIMETERS NOMINAL |
| FIRST LEG END WIDTH | 123.0 MILLIMETERS NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG ANGLE | 8.5 RADIANS MINIMUM AND 9.5 RADIANS MAXIMUM |
| FIRST LEG CHAMFER ANGLE | 15.0 DEGREES MINIMUM AND 21.0 RADIANS MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 98.0 MILLIMETERS NOMINAL |
| FIRST LEG LENGTH | 64.5 MILLIMETERS MINIMUM AND 65.5 MILLIMETERS MAXIMUM |
| FIRST LEG STYLE | CHAMFERED ENDS |
| FIRST LEG THICKNESS | 8.0 MILLIMETERS NOMINAL |
| FIRST LEG HOLE DIAMETER | 17.4 MILLIMETERS MINIMUM AND 18.0 MILLIMETERS MAXIMUM |
| FIRST LEG WIDTH | 209.5 MILLIMETERS MINIMUM AND 210.5 MILLIMETERS MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-A-572 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 24.0 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 25.0 MILLIMETERS NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG LENGTH | 99.2 MILLIMETERS MINIMUM AND 100.8 MILLIMETERS MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 8.0 MILLIMETERS NOMINAL |
| SECOND LEG HOLE DIAMETER | 16.5 MILLIMETERS MINIMUM AND 17.1 MILLIMETERS MAXIMUM |
| SECOND LEG WIDTH | 209.5 MILLIMETERS MINIMUM AND 210.5 MILLIMETERS MAXIMUM |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | TT-C-490, TYPE 1 FED SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PHOSPHATE ZINC |