| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.4700 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.5900 INCHES MINIMUM AND 0.6500 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 1.0900 INCHES MINIMUM AND 1.1500 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 5.0000 INCHES NOMINAL |
| FIRST LEG LENGTH | 3.0900 INCHES MINIMUM AND 3.1500 INCHES MAXIMUM |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.1250 INCHES NOMINAL |
| FIRST LEG HOLE DIAMETER | 0.4060 INCHES MINIMUM AND 0.4160 INCHES MAXIMUM |
| FIRST LEG WIDTH | 6.2200 INCHES MINIMUM AND 6.2800 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-B-209 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 5052 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE BETWEEN UPPER HOLE CENTERS ALONG WIDTH | 4.0000 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.5300 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.1100 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 2.0000 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 8.0000 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.1250 INCHES NOMINAL |
| SECOND LEG HOLE DIAMETER | 0.2500 INCHES MINIMUM AND 0.2600 INCHES MAXIMUM |
| SECOND LEG LENGTH | 11.4700 INCHES MINIMUM AND 11.5300 INCHES MAXIMUM |
| SECOND LEG WIDTH | 6.2200 INCHES MINIMUM AND 6.2800 INCHES MAXIMUM |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171,FINISH 7.3.1 MIL STD SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | ANODIZE |
| SPECIAL FEATURES | THERE IS A PIECE ATTACHED TO THE BRACKET. |