| FIRST LEG ANGLE | 0.1880 RADIANS MINIMUM AND 0.1900 RADIANS MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.9800 INCHES MINIMUM AND 1.0200 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.7300 INCHES MINIMUM AND 1.7700 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | 2 SLOTS |
| FIRST LEG CORNER RADIUS | 0.3000 INCHES MINIMUM AND 0.3200 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 6.4800 INCHES MINIMUM AND 6.5200 INCHES MAXIMUM |
| FIRST LEG SLOT LENGTH | 1.0000 INCHES MINIMUM AND 1.2000 INCHES MAXIMUM |
| FIRST LEG SLOT WIDTH | 0.4000 INCHES MINIMUM AND 0.6000 INCHES MAXIMUM |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.1900 INCHES NOMINAL |
| FIRST LEG LENGTH | 2.2200 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM |
| FIRST LEG WIDTH | 9.9700 INCHES MINIMUM AND 10.0000 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-B-209 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 5052 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE BETWEEN UPPER HOLE CENTERS ALONG WIDTH | 5.8600 INCHES MINIMUM AND 5.8800 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.4900 INCHES MINIMUM AND 1.5100 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.4900 INCHES MINIMUM AND 0.5100 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| SECOND LEG CORNER RADIUS | 0.3000 INCHES MINIMUM AND 0.3200 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 0.8100 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 3.2400 INCHES MINIMUM AND 3.2600 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN LOWER HOLE CENTERS ALONG WIDTH | 4.2400 INCHES MINIMUM AND 4.2600 INCHES MAXIMUM |
| SECOND LEG LENGTH | 6.7200 INCHES MINIMUM AND 6.7500 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CORNER RADIUS |
| SECOND LEG THICKNESS | 0.1900 INCHES NOMINAL |
| SECOND LEG HOLE DIAMETER | 0.2500 INCHES MINIMUM AND 0.2700 INCHES MAXIMUM |
| SECOND LEG WIDTH | 9.9700 INCHES MINIMUM AND 10.0000 INCHES MAXIMUM |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-SRD-171,FINISH 7.3.1 MIL STD SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | ANODIZE |
| SPECIAL FEATURES | THIS IS OPPOSITE OF PART NUMBER 11B252003-1(LEFT HAND) |