| FIRST LEG ANGLE | 0.09 RADIANS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.1560 INCHES NOMINAL |
| FIRST LEG END WIDTH | 0.9300 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.1560 INCHES NOMINAL |
| FIRST LEG CHAMFER ANGLE | 43.0 RADIANS MINIMUM AND 47.0 RADIANS MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.6250 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.1600 INCHES NOMINAL |
| FIRST LEG STYLE | CHAMFERED ENDS |
| FIRST LEG THICKNESS | 0.0900 INCHES NOMINAL |
| FIRST LEG WIDTH | 0.8100 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.5000 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 304 |
| MOUNTING HOLE TYPE | COUNTERSUNK |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.1390 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.1420 INCHES NOMINAL |
| SECOND LEG END WIDTH | 1.0700 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| SECOND LEG CHAMFER ANGLE | 43.0 RADIANS MINIMUM AND 47.0 RADIANS MAXIMUM |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.9060 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.9060 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CHAMFERED ENDS |
| SECOND LEG THICKNESS | 0.0900 INCHES NOMINAL |
| SECOND LEG HOLE DIAMETER | 0.1400 INCHES NOMINAL |
| SECOND LEG LENGTH | 1.6200 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.1900 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |
| SPECIAL FEATURES | THERE IS AN APERTURE ON THE LONGEST LEG WITH A DIAMETER OF 0.9650 IN. |