|
|
|
National Stock Number:
5340-01-426-1763
Federal Supply Class:
5340
National Item Identification Number:
014261763
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 3797670-6 | 59364 | HONEYWELL INTERNATIONAL INC. | | 3797679-1 | 59364 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 0.7500 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.0620 INCHES NOMINAL | | CENTER SECTION WIDTH | 0.2500 INCHES NOMINAL | | FIRST LEG ANGLE | 0.09 RADIANS NOMINAL | | FIRST LEG END WIDTH | 8.0200 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE | | FIRST LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | FIRST LEG STYLE | CHAMFERED ENDS | | FIRST LEG THICKNESS | 0.0630 INCHES NOMINAL | | FIRST LEG LENGTH | 0.1900 INCHES NOMINAL | | FIRST LEG WIDTH | 8.1000 INCHES MINIMUM AND 8.1200 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 | | SECOND LEG ANGLE | 0.09 RADIANS NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL | | SECOND LEG THICKNESS | 0.0630 INCHES NOMINAL | | SECOND LEG LENGTH | 0.1900 INCHES NOMINAL | | STYLE DESIGNATOR | ADJACENT ANGLES | | SPECIAL FEATURES | THERE ARE TWO HOLES WITH A DIA. OF 0.164-32 UNC-2B;THEY ARE LOCATED 0.3750 IN. FROM SIDE TO CENTER OF HOLE AND FROM END TO CENTER OF HOLE IS 0.2475 IN.;THE TWO HOLES ARE LOCATED 7.6250 IN FROM CENTER OF HOLE TO CENTER OFHOLE |
|
|