|
|
|
National Stock Number:
5340-01-425-5493
Federal Supply Class:
5340
National Item Identification Number:
014255493
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 82-2752979-1 | 67032 | GENERAL DYNAMICS MISSION SYSTEMS, INC. |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 3.0000 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.1250 INCHES NOMINAL | | CENTER SECTION WIDTH | 12.9000 INCHES NOMINAL | | FIRST LEG ANGLE | 0.1200 RADIANS NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE | | FIRST LEG STYLE | SQUARE | | FIRST LEG THICKNESS | 0.1250 INCHES NOMINAL | | FIRST LEG LENGTH | 0.6200 INCHES NOMINAL | | FIRST LEG WIDTH | 12.9000 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/8 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 5052 | | MOUNTING HOLE TYPE | PLAIN | | SECOND LEG ANGLE | 0.1200 RADIANS NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL | | SECOND LEG THICKNESS | 0.1250 INCHES NOMINAL | | SECOND LEG LENGTH | 0.6200 INCHES NOMINAL | | STYLE DESIGNATOR | ADJACENT ANGLES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-14072 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | ANODIZE | | SPECIAL FEATURES | THERE ARE FOUR HOLES ON TOP OF PIECE; THEY ARE LOCATED 0.3400 IN FROM END TO CENTER OF HOLES AND THERE ARE TWO HOLES ON EACH END THEY ARE LOCATED 12.9000 IN FROM CENTER OF FIRST TWO HOLES SETS TO CENTER OF HOLES OF SECOND SET;THE HOLES ARE LOCATED 0.627 IN. FROM RIGHT SIDE TO CENTER OF HOLES AND 1.7500 IN. FROM CENTER OF HOLES TO CENTER OF HOLES ALONG WIDTH |
|
|