| CENTER SECTION HEIGHT | 3.2800 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.1900 INCHES NOMINAL |
| CENTER SECTION WIDTH | 2.000 INCHES NOMINAL |
| FIRST LEG ANGLE | 0.5700 RADIANS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.7200 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.0000 INCHES NOMINAL |
| FIRST LEG END WIDTH | 1.2400 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG CHAMFER ANGLE | 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| FIRST LEG STYLE | CHAMFERED ENDS |
| FIRST LEG THICKNESS | 0.1900 INCHES NOMINAL |
| FIRST LEG HOLE DIAMETER | 0.4060 INCHES MINIMUM AND 0.4600 INCHES MAXIMUM |
| FIRST LEG LENGTH | 2.2500 INCHES NOMINAL |
| FIRST LEG WIDTH | 2.0000 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/6 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/7 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 5083 |
| MOUNTING HOLE TYPE | PLAIN |
| REINFORCEMENT METHOD | RIB STIFFENER |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.3750 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.0000 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG ANGLE | 0.5700 RADIANS NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 2.2500 INCHES NOMINAL |
| SECOND LEG LENGTH | 3.5000 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.1900 INCHES NOMINAL |
| SECOND LEG HOLE DIAMETER | 0.2210 INCHES MINIMUM AND 0.2580 INCHES MAXIMUM |
| SECOND LEG WIDTH | 2.0000 INCHES NOMINAL |
| STYLE DESIGNATOR | DOUBLE ANGLE |