| FIRST LEG ANGLE | 0.094 RADIANS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.271 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.605 INCHES NOMINAL |
| FIRST LEG END WIDTH | 1.198 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| FIRST LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST LEG SLOT LENGTH | 0.581 INCHES MINIMUM AND 0.591 INCHES MAXIMUM |
| FIRST LEG SLOT WIDTH | 0.308 INCHES NOMINAL |
| FIRST LEG STYLE | CHAMFERED ENDS |
| FIRST LEG THICKNESS | 0.094 INCHES NOMINAL |
| FIRST LEG WIDTH | 1.210 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.650 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 TYPE 304, COND A FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 304 |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.148 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG CUTOUT LENGTH | 0.440 INCHES NOMINAL |
| SECOND LEG CUTOUT WIDTH | 0.610 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.910 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CUT OUT |
| SECOND LEG THICKNESS | 0.094 INCHES NOMINAL |
| SECOND LEG HOLE DIAMETER | 0.161 INCHES MINIMUM AND 0.171 INCHES MAXIMUM |
| SECOND LEG LENGTH | 0.715 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.210 INCHES NOMINAL |
| SPECIAL FEATURES | 2 HOLES EITHER SIDE OF SLOT, 0.086-56 UNC-2B;ENDS OF SECOND (CUTOUT) LEG ARE EACH ROUNDED |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35, TYPE VII (F-16, MTHD 12) FED SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PASSIVATE |