| CENTER SECTION HEIGHT | 0.490 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.090 INCHES NOMINAL |
| CENTER SECTION WIDTH | 0.750 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.380 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG ANGLE | 45.0 DEGREES NOMINAL |
| FIRST LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST LEG STYLE | CHAMFERED ENDS |
| FIRST LEG THICKNESS | 0.090 INCHES NOMINAL |
| FIRST LEG WIDTH | 0.750 INCHES NOMINAL |
| FIRST LEG HOLE DIAMETER | 0.315 INCHES MINIMUM AND 0.322 INCHES MAXIMUM |
| FIRST LEG LENGTH | 1.160 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A240 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 304 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.440 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.380 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG ANGLE | 45.0 DEGREES NOMINAL |
| SECOND LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CHAMFERED ENDS |
| SECOND LEG THICKNESS | 0.090 INCHES NOMINAL |
| SECOND LEG HOLE DIAMETER | 0.377 INCHES MINIMUM AND 0.382 INCHES MAXIMUM |
| SECOND LEG WIDTH | 0.750 INCHES NOMINAL |
| STYLE DESIGNATOR | DOUBLE ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PASSIVATE |