|
|
|
National Stock Number:
5340-01-407-2758
Federal Supply Class:
5340
National Item Identification Number:
014072758
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 12448478 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | RCSK14726 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | RCSK14726 | 34623 | AM GENERAL LLC |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 1.359 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.0897 INCHES NOMINAL | | CENTER SECTION WIDTH | 1.000 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.280 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.310 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG STYLE | SQUARE | | FIRST LEG THICKNESS | 0.0897 INCHES NOMINAL | | FIRST LEG WIDTH | 1.000 INCHES NOMINAL | | FIRST LEG HOLE DIAMETER | 0.281 INCHES NOMINAL | | FIRST LEG LENGTH | 0.700 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A715 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | MOUNTING HOLE TYPE | PLAIN | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.280 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.280 INCHES NOMINAL | | SECOND LEG END RADIUS | 0.280 INCHES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | END RADIUS AND TAPERED | | SECOND LEG THICKNESS | 0.0897 INCHES NOMINAL | | SECOND LEG HOLE DIAMETER | 0.281 INCHES NOMINAL | | SECOND LEG LENGTH | 0.700 INCHES NOMINAL | | SECOND LEG WIDTH | 1.000 INCHES NOMINAL | | SPECIAL FEATURES | ONE PIN LOCATED ON FIRST LEG; ONE ADDITIONAL HOLE LOCATED ON CENTER SECTION, 0.150 IN. DIA | | STYLE DESIGNATOR | ADJACENT ANGLES |
|
|