|
|
|
National Stock Number:
5340-01-406-8054
Federal Supply Class:
5340
National Item Identification Number:
014068054
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 55940 | 34228 | L3 TECHNOLOGIES, INC. | | 933C055940 | 34228 | L3 TECHNOLOGIES, INC. |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 1.752 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.036 INCHES NOMINAL | | CENTER SECTION WIDTH | 4.180 INCHES MINIMUM AND 4.220 INCHES MAXIMUM | | FIRST LEG END WIDTH | 4.080 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | FIRST LEG STYLE | CHAMFERED ENDS | | FIRST LEG THICKNESS | 0.036 INCHES NOMINAL | | FIRST LEG LENGTH | 0.900 INCHES MINIMUM AND 0.980 INCHES MAXIMUM | | FIRST LEG WIDTH | 4.180 INCHES MINIMUM AND 4.220 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 COND A FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 304 | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL | | SECOND LEG THICKNESS | 0.036 INCHES NOMINAL | | SECOND LEG LENGTH | 0.900 INCHES MINIMUM AND 0.980 INCHES MAXIMUM | | SPECIAL FEATURES | FOUR HOLES ON CENTER SECTION, 0.156 IN. DIA | | STYLE DESIGNATOR | ADJACENT ANGLES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-13924 CL 4 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | OXIDE |
|
|