|
|
|
National Stock Number:
5340-01-390-4198
Federal Supply Class:
5340
National Item Identification Number:
013904198
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 6531-354017-1 | 80070 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 1.870 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.090 INCHES NOMINAL | | CENTER SECTION WIDTH | 0.870 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.375 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.438 INCHES NOMINAL | | FIRST LEG END WIDTH | 0.670 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | FIRST LEG STYLE | CHAMFERED ENDS | | FIRST LEG THICKNESS | 0.090 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | FIRST LEG HOLE DIAMETER | 0.385 INCHES MINIMUM AND 0.392 INCHES MAXIMUM | | FIRST LEG LENGTH | 0.750 INCHES NOMINAL | | FIRST LEG WIDTH | 0.870 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/8 H34 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 5052 | | MOUNTING HOLE TYPE | PLAIN | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG LENGTH | 0.750 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL | | SECOND LEG THICKNESS | 0.090 INCHES NOMINAL | | STYLE DESIGNATOR | ADJACENT ANGLES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-46168 TY 1, 2, OR 3 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PLASTIC POLYURETHANE |
|
|