| CENTER SECTION HEIGHT | 6.7500 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.1900 INCHES NOMINAL |
| CENTER SECTION WIDTH | 2.2500 INCHES NOMINAL |
| FIRST LEG ANGLE | 0.5600 RADIANS NOMINAL |
| FIRST LEG CHAMFER ANGLE | 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.5900 INCHES NOMINAL |
| FIRST LEG END WIDTH | 1.7500 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.1200 INCHES NOMINAL |
| FIRST LEG SLOT WIDTH | 0.6200 INCHES NOMINAL |
| FIRST LEG STYLE | CHAMFERED ENDS |
| FIRST LEG THICKNESS | 0.1900 INCHES NOMINAL |
| FIRST LEG WIDTH | 2.2500 INCHES NOMINAL |
| FIRST LEG LENGTH | 1.7500 INCHES NOMINAL |
| FIRST LEG SLOT LENGTH | 1.5000 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/6 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/7 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-200/4 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-200/5 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 5083 OR ALUMINUM ALLOY 5086 |
| MOUNTING HOLE DIAMETER | 0.4060 INCHES MINIMUM AND 0.4600 INCHES MAXIMUM |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG ANGLE | 0.5600 RADIANS NOMINAL |
| SECOND LEG THICKNESS | 0.1900 INCHES NOMINAL |
| SECOND LEG LENGTH | 1.7500 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL |
| STYLE DESIGNATOR | ADJACENT ANGLES |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CHROMATE |