| CENTER SECTION HEIGHT | 231.0 MILLIMETERS NOMINAL |
| CENTER SECTION THICKNESS | 10.0 MILLIMETERS NOMINAL |
| CENTER SECTION WIDTH | 140.0 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 36.5 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 20.0 MILLIMETERS NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 78.0 MILLIMETERS NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 10.0 MILLIMETERS NOMINAL |
| FIRST LEG HOLE DIAMETER | 17.5 MILLIMETERS NOMINAL |
| FIRST LEG LENGTH | 106.0 MILLIMETERS NOMINAL |
| FIRST LEG WIDTH | 140.0 MILLIMETERS NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A36 ASSN STD SINGLE MATERIAL RESPONSE OR STM A570 GRADE 36 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 36.5 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 20.0 MILLIMETERS NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 71.0 MILLIMETERS NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 10.0 MILLIMETERS NOMINAL |
| SECOND LEG HOLE DIAMETER | 17.5 MILLIMETERS NOMINAL |
| SECOND LEG LENGTH | 106.0 MILLIMETERS NOMINAL |
| SECOND LEG WIDTH | 110.0 MILLIMETERS NOMINAL |
| STYLE DESIGNATOR | ADJACENT ANGLES |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-46168 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PLASTIC POLYURETHANE |