| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.150 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.112 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.275 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.150 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.150 INCHES NOMINAL |
| FIRST LEG WIDTH | 0.300 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.570 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-C-1186T6 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-A-21180 MIL SPEC 1ST MATERIAL RESPONSE OR ASTMB209 T6ORT651 ASSN STD 2ND MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 356.0 OR ALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 6061 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.130 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | 2 SLOTS |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.190 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT LENGTH | 0.280 INCHES NOMINAL |
| SECOND LEG SLOT WIDTH | 0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| SECOND LEG STYLE | ANGLE |
| SECOND LEG THICKNESS | 0.110 INCHES NOMINAL |
| SECOND LEG WIDTH | 0.680 INCHES NOMINAL |
| SPECIAL FEATURES | 1ST LEG MTG HOLES THD 0.112-40 UNC-2B; 2ND LEG SLOTS ON ANGLE OF 38 DEG |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171 MIL STD SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | ANODIZE |