|
|
|
National Stock Number:
5340-01-382-7502
Federal Supply Class:
5340
National Item Identification Number:
013827502
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 3C3547P09 | 66464 | GENERAL ELECTRIC CO |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 2.800 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.120 INCHES NOMINAL | | CENTER SECTION WIDTH | 3.000 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES MINIMUM AND 0.520 INCHES MAXIMUM | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.000 INCHES NOMINAL | | FIRST LEG STYLE | SQUARE | | FIRST LEG THICKNESS | 0.120 INCHES NOMINAL | | FIRST LEG HOLE DIAMETER | 0.344 INCHES NOMINAL | | FIRST LEG LENGTH | 1.500 INCHES NOMINAL | | FIRST LEG WIDTH | 3.000 INCHES NOMINAL | | MATERIAL | STEEL | | MOUNTING HOLE TYPE | PLAIN | | SECOND LEG HOLE ARRANGEMENT STYLE | THREE HOLES | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG THICKNESS | 0.120 INCHES NOMINAL | | SECOND LEG HOLE DIAMETER | 0.218 INCHES NOMINAL | | SECOND LEG LENGTH | 1.920 INCHES NOMINAL | | STYLE DESIGNATOR | DOUBLE ANGLE |
|
|