|
|
|
National Stock Number:
5340-01-381-3772
Federal Supply Class:
5340
National Item Identification Number:
013813772
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 025928-1 | 59027 | MEGGITT DEFENSE SYSTEMS, INC. DBA MEGGITT WESTERN DESIGN | | 025928-1 | 62228 | MEGGITT DEFENSE SYSTEMS, INC. |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 1.920 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.190 INCHES NOMINAL | | CENTER SECTION WIDTH | 5.120 INCHES NOMINAL | | FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 0.859 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.380 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.246 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 1.985 INCHES NOMINAL | | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 4.790 INCHES NOMINAL | | FIRST LEG STYLE | CHAMFERED ENDS | | FIRST LEG THICKNESS | 0.190 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | FOUR HOLES | | FIRST LEG HOLE DIAMETER | 0.220 INCHES MINIMUM AND 0.226 INCHES MAXIMUM | | FIRST LEG LENGTH | 1.120 INCHES NOMINAL | | FIRST LEG WIDTH | 5.120 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 T6 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-225/8 T6 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-200/8 T6 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 | | MOUNTING HOLE TYPE | PLAIN | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG LENGTH | 1.560 INCHES NOMINAL | | SECOND LEG WIDTH | 5.120 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | SQUARE | | SECOND LEG THICKNESS | 0.190 INCHES NOMINAL | | STYLE DESIGNATOR | ADJACENT ANGLES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 TY 2 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | ANODIZE |
|
|