|
|
|
National Stock Number:
5340-01-380-0141
Federal Supply Class:
5340
National Item Identification Number:
013800141
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 1339AS820-1 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 1.500 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.125 INCHES NOMINAL | | CENTER SECTION WIDTH | 12.620 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.880 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.810 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 9.000 INCHES NOMINAL | | FIRST LEG STYLE | SQUARE | | FIRST LEG THICKNESS | 0.125 INCHES NOMINAL | | FIRST LEG HOLE DIAMETER | 0.250 INCHES NOMINAL | | FIRST LEG LENGTH | 1.500 INCHES NOMINAL | | FIRST LEG WIDTH | 12.620 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/9 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6063 | | MOUNTING HOLE DIAMETER | 0.160 INCHES NOMINAL | | MOUNTING HOLE TYPE | PLAIN | | NONDEFINITIVE SPEC/STD DATA | 6063 ALLOY AND T5 TEMPER | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL | | SECOND LEG THICKNESS | 0.125 INCHES NOMINAL | | SECOND LEG LENGTH | 1.500 INCHES NOMINAL | | SPECIAL FEATURES | 5 MOUNTING HOLES SPACED 3 IN. APART CENTERED ALONG C/L LINE WITH CENTER OF HOLE .310 IN. FROM EACH END | | STYLE DESIGNATOR | ADJACENT ANGLES |
|
|