|
|
|
National Stock Number:
5340-01-320-5946
Federal Supply Class:
5340
National Item Identification Number:
013205946
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 1210350 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 0.257 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.032 INCHES NOMINAL | | CENTER SECTION WIDTH | 0.625 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE | | FIRST LEG ANGLE | 45.0 DEGREES NOMINAL | | FIRST LEG CORNER RADIUS | 0.062 INCHES NOMINAL | | FIRST LEG STYLE | CORNER RADIUS | | FIRST LEG THICKNESS | 0.032 INCHES NOMINAL | | FIRST LEG WIDTH | 0.625 INCHES NOMINAL | | FIRST LEG LENGTH | 0.312 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/1 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-250/2 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-250/8 FED SPEC 3RD MATERIAL RESPONSE OR QQ-A-250/11 FED SPEC 4TH MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 1100 OR ALUMINUM ALLOY 3003 OR ALUMINUM ALLOY 5052 OR ALUMINUM ALLOY 6061 | | MOUNTING HOLE TYPE | PLAIN | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.312 INCHES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | SECOND LEG HOLE DIAMETER | 0.125 INCHES NOMINAL | | SECOND LEG ANGLE | 45.0 DEGREES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | SQUARE | | SECOND LEG THICKNESS | 0.032 INCHES NOMINAL | | SECOND LEG WIDTH | 0.625 INCHES NOMINAL | | STYLE DESIGNATOR | DOUBLE ANGLE |
|
|