| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.190 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.188 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.092 INCHES MINIMUM AND 0.097 INCHES MAXIMUM |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.375 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM |
| FIRST LEG WIDTH | 0.750 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.500 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 T4 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6061 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| SECOND LEG CORNER RADIUS | 0.060 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG THICKNESS | 0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM |
| SECOND LEG WIDTH | 0.450 INCHES NOMINAL |
| SECOND LEG LENGTH | 0.800 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 TY 2 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | ANODIZE |
| SPECIAL FEATURES | TWO NOTCHES ON SECOND LEG,0.060 IN. BY 0.100 IN. |