| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.995 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.000 INCHES NOMINAL |
| FIRST LEG END RADIUS | 1.000 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 2.620 INCHES NOMINAL |
| FIRST LEG STYLE | END RADIUS |
| FIRST LEG THICKNESS | 0.750 INCHES NOMINAL |
| FIRST LEG HOLE DIAMETER | 1.000 INCHES MINIMUM AND 1.003 INCHES MAXIMUM |
| FIRST LEG WIDTH | 2.000 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A743,GR CA-15 ASSN STD 2ND MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 416 OR STEEL CORROSION RESISTING |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.120 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.627 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG CORNER RADIUS | 1.000 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.500 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.687 INCHES NOMINAL |
| SECOND LEG LENGTH | 2.620 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG HOLE DIAMETER | 0.670 INCHES MINIMUM AND 0.680 INCHES MAXIMUM |
| SECOND LEG WIDTH | 2.940 INCHES NOMINAL |
| SPECIAL FEATURES | SECOND CORNER RADIUS ON SECOND LEG 0.620 IN.; FIRST LEG,TWO INLINE HOLES 0.250 IN. MIN 0.256 IN. MAX DIA SPACED 1.625 IN. FROM FLAT END; HARDEN AND TEMPER TO ROCKWELL C35 TO C40 |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PASSIVATE |