|
|
|
National Stock Number:
5340-01-318-8273
Federal Supply Class:
5340
National Item Identification Number:
013188273
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 5548892 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 0.812 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.062 INCHES NOMINAL | | CENTER SECTION WIDTH | 3.630 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.190 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.910 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.812 INCHES NOMINAL | | FIRST LEG STYLE | SQUARE | | FIRST LEG THICKNESS | 0.062 INCHES NOMINAL | | FIRST LEG HOLE DIAMETER | 0.213 INCHES MINIMUM AND 0.216 INCHES MAXIMUM | | FIRST LEG LENGTH | 0.500 INCHES NOMINAL | | FIRST LEG WIDTH | 3.630 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/8,H32 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 5052 | | MOUNTING HOLE TYPE | PLAIN | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG CHAMFER ANGLE | 60.0 DEGREES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | CHAMFERED ENDS | | SECOND LEG THICKNESS | 0.062 INCHES NOMINAL | | SECOND LEG LENGTH | 1.622 INCHES NOMINAL | | SECOND LEG WIDTH | 3.630 INCHES NOMINAL | | SPECIAL FEATURES | ITEM INCLUDES 2 STANDOFFS 4-40 UNC-2B | | STYLE DESIGNATOR | DOUBLE ANGLE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541,CL 1A MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CHROMATE |
|
|