| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.620 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 1.250 INCHES NOMINAL |
| FIRST LEG STYLE | CHAMFERED ENDS |
| FIRST LEG THICKNESS | 0.065 INCHES NOMINAL |
| FIRST LEG END WIDTH | 0.500 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.194 INCHES MINIMUM AND 0.254 INCHES MAXIMUM |
| FIRST LEG WIDTH | 1.000 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A569 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A366 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A109 TEMP 3,TEMP 4,TEMP 5 ASSN STD 2ND MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 1009 OR STEEL |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.620 INCHES NOMINAL |
| SECOND LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND LEG LENGTH | 2.500 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL |
| SECOND LEG END WIDTH | 0.500 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.506 INCHES MINIMUM AND 0.565 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CHAMFERED ENDS |
| SECOND LEG THICKNESS | 0.065 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.000 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 3 FED SPEC ALL TREATMENT RESPONSES |
| SURFACE TREATMENT | CADMIUM AND CHROMATE |