|
|
|
National Stock Number:
5340-01-317-6775
Federal Supply Class:
5340
National Item Identification Number:
013176775
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 4069482 | 77445 | RTX CORPORATION | | 5340PL0852277 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 1.950 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.440 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.312 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.370 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG STYLE | END RADIUS | | FIRST LEG THICKNESS | 0.125 INCHES NOMINAL | | FIRST LEG HOLE DIAMETER | 0.281 INCHES NOMINAL | | FIRST LEG LENGTH | 0.752 INCHES NOMINAL | | FSC APPLICATION DATA | LOWER FRONT DIAGNOSTIC UNIT | | MATERIAL DOCUMENT AND CLASSIFICATION | PWA SPEC 1262 MFR REF SINGLE MATERIAL RESPONSE | | MATERIAL | TITANIUM ALLOY | | MOUNTING HOLE TYPE | PLAIN | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.301 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.135 INCHES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | CORNER RADIUS | | SECOND LEG THICKNESS | 0.125 INCHES NOMINAL | | SECOND LEG HOLE DIAMETER | 0.221 INCHES NOMINAL | | SECOND LEG LENGTH | 1.053 INCHES NOMINAL | | STYLE DESIGNATOR | DOUBLE ANGLE |
|
|