|
|
|
National Stock Number:
5340-01-315-9127
Federal Supply Class:
5340
National Item Identification Number:
013159127
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 68A412759-2001 | 13002 | GOODRICH CORPORATION | | 68A412759-2001 | 6K4C8 | GOODRICH CORPORATION | | 68A412759-2001 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| CENTER SECTION THICKNESS | 0.125 INCHES NOMINAL | | CRITICALITY CODE JUSTIFICATION | FEAT | | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES | | FIRST LEG ANGLE | 58.0 DEGREES NOMINAL | | FIRST LEG THICKNESS | 0.125 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059,301 1/4 HARD MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 301 | | MOUNTING HOLE TYPE | PLAIN | | SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | END RADIUS AND TAPERED | | SECOND LEG THICKNESS | 0.125 INCHES NOMINAL | | SECOND LEG HOLE DIAMETER | 0.204 INCHES MINIMUM AND 0.210 INCHES MAXIMUM | | SPECIAL FEATURES | 1ST LEG HOLE DIAMETERS ARE DIFFERENT; ITEM IS NOT CSI BUT HAS CRITICAL FEATURES SUCH AS HEAT TREATMENT, SURFACE FINISH, OR MATERIAL TYPE AND SPECIAL INSPECTION REQUIREMENTS SUCH AS MAGNETIC PARTICLE INSPECTION OR FLUORESCENT PENETRANT INSPECTION | | STYLE DESIGNATOR | ADJACENT ANGLES |
|
|