5340-01-314-0092, BRACKET,DOUBLE ANGLE

National Stock Number:
5340-01-314-0092

Federal Supply Class:
5340

National Item Identification Number:
013140092

Description:
BRACKET,DOUBLE ANGLE

Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.

Manufacturer Information:

5979192

53711

NAVAL SEA SYSTEMS COMMAND

Techincal Specification:

CENTER SECTION HEIGHT	3.000 INCHES NOMINAL
CENTER SECTION THICKNESS	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
CENTER SECTION WIDTH	1.500 INCHES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	1.150 INCHES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.790 INCHES NOMINAL
FIRST LEG HOLE ARRANGEMENT STYLE	TWO HOLES
FIRST LEG ANGLE	90.0 DEGREES NOMINAL
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH	1.386 INCHES NOMINAL
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH	2.240 INCHES MINIMUM AND 2.260 INCHES MAXIMUM
FIRST LEG LENGTH	3.150 INCHES NOMINAL
FIRST LEG STYLE	EXTENDED FLAT
FIRST LEG THICKNESS	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
FIRST LEG HOLE DIAMETER	0.529 INCHES MINIMUM AND 0.543 INCHES MAXIMUM
FIRST LEG WIDTH	3.250 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	AISI ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL	STEEL COMP 1018
MOUNTING HOLE TYPE	PLAIN
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.620 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	1.250 INCHES NOMINAL
SECOND LEG END WIDTH	1.120 INCHES NOMINAL
SECOND LEG HOLE ARRANGEMENT STYLE	TWO HOLES
SECOND LEG ANGLE	100.0 DEGREES NOMINAL
SECOND LEG CHAMFER ANGLE	45.0 DEGREES NOMINAL
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH	4.380 INCHES NOMINAL
SECOND LEG LENGTH	5.750 INCHES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG	NOT IDENTICAL
SECOND LEG STYLE	CHAMFERED ENDS
SECOND LEG THICKNESS	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
SECOND LEG HOLE DIAMETER	0.263 INCHES MINIMUM AND 0.273 INCHES MAXIMUM
SECOND LEG WIDTH	1.500 INCHES NOMINAL
SPECIAL FEATURES	FRIST LEG IRREGULAR SHAPE
STYLE DESIGNATOR	DOUBLE ANGLE
SURFACE TREATMENT	ENAMEL SEMIGLOSS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	TT-E-490 FED SPEC SINGLE TREATMENT RESPONSE

Click here to Register for Free 30-day Trial