5340-01-271-0384 COVER,ACCESS Index 5340-01-271-0386 CLAMP,LOOP

National Stock Number:
5340-01-271-0385

Federal Supply Class:
5340

National Item Identification Number:
012710385

Description:
CLAMP,BLOCK

Detail:
A SQUARE OR RECTANGULAR MULTIPIECE ITEM DESIGNED TO BE ATTACHED TO ANOTHER OBJECT OR STRUCTURE. IT MUST HAVE ONE OR MORE HOLES DESIGNED TO SURROUND AND SECURELY GRIP ITEMS SUCH AS ELECTRICAL CABLES, CONDUITS, PIPES, TUBES AND/OR HOSES. IT MAY HAVE ONE OR MORE HOLES DESIGNED TO PREVENT SNAGGING OR CHAFING AND PROVIDE SUPPORT AND/OR GUIDANCE TO MOVING CABLE PASSING THROUGH IT. IT MAY HAVE AN INTEGRAL CLAMPING FEATURE. FOR ITEMS SPECIFICALLY DESIGNED TO SERVE AS A GUIDE, SEE FAIRLEAD, BLOCK AND FAIRLEAD SECTION, BLOCK. EXCLUDES BRACKET, PIPE.


Manufacturer Information:
1094366219207U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM


Techincal Specification:
DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH0.235 INCHES MINIMUM AND 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM0.265 INCHES MAXIMUM
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER1.000 INCHES NOMINAL
DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER0.370 INCHES NOMINAL
BLOCK HEIGHT0.735 INCHES MINIMUM AND 0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM0.765 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN FIRST AND FIFTH CLAMPING HOLES3.130 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN FIRST AND FOURTH CLAMPING HOLES2.380 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES0.500 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES6.240 INCHES MINIMUM AND 6.240 INCHES MINIMUM AND 6.260 INCHES MAXIMUM6.260 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SIXTH CLAMPING HOLES3.880 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD CLAMPING HOLES1.750 INCHES NOMINAL
CLAMPING HOLE DIAMETER0.500 INCHES MINIMUM AND 0.506 INCHES MAXIMUM FIRST HOLE
CLAMPING HOLE DIAMETER0.500 INCHES MINIMUM AND 0.506 INCHES MAXIMUM SECOND HOLE
CLAMPING HOLE QUANTITY1111
CLAMPING HOLE DIAMETER0.250 INCHES MINIMUM AND 0.256 INCHES MAXIMUM FIFTH HOLE
CLAMPING HOLE DIAMETER0.250 INCHES MINIMUM AND 0.256 INCHES MAXIMUM FOURTH HOLE
CLAMPING HOLE DIAMETER0.250 INCHES MINIMUM AND 0.256 INCHES MAXIMUM SIXTH HOLE
CLAMPING HOLE DIAMETER0.250 INCHES MINIMUM AND 0.256 INCHES MAXIMUM THIRD HOLE
OVERALL HEIGHT3.000 INCHES NOMINAL3.000 INCHES NOMINAL
OVERALL LENGTH7.000 INCHES NOMINAL7.000 INCHES NOMINAL
OVERALL WIDTH0.452 INCHES MINIMUM AND 0.452 INCHES MINIMUM AND 0.548 INCHES MAXIMUM0.548 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-P-15035,TY FBM MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-P-15035,TY FBI MIL SPEC SINGLE MATERIAL RESPONSE
MATERIALPLASTIC
MOUNTING FACILITYUNTHREADED HOLE(S)UNTHREADED HOLE(S)
MOUNTING HOLE DIAMETER0.280 INCHES MINIMUM AND 0.280 INCHES MINIMUM AND 0.286 INCHES MAXIMUM0.286 INCHES MAXIMUM
MOUNTING HOLE QUANTITY22
SPECIAL FEATURESFIVE ADDITIONAL CLAMPING HOLES 0.250 MIN TO 0.256 MAX INCHES DIA
STYLE DESIGNATORRECTANGULAR
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-V-173 MIL SPEC SINGLE TREATMENT RESPONSE
SURFACE TREATMENTVARNISH


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us