|
|
|
National Stock Number:
5340-01-256-9652
Federal Supply Class:
5340
National Item Identification Number:
012569652
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 2803632-1 | 55972 | HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 0.650 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.040 INCHES NOMINAL | | CENTER SECTION WIDTH | 0.312 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.156 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | FIRST LEG HOLE DIAMETER | 0.125 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.100 INCHES NOMINAL | | FIRST LEG STYLE | SQUARE | | FIRST LEG THICKNESS | 0.040 INCHES NOMINAL | | FIRST LEG WIDTH | 0.312 INCHES NOMINAL | | FIRST LEG LENGTH | 0.260 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/B FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 5052 | | SECOND LEG HOLE ARRANGEMENT STYLE | NO HOLE | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | SQUARE | | SECOND LEG THICKNESS | 0.040 INCHES NOMINAL | | SECOND LEG WIDTH | 0.312 INCHES NOMINAL | | SECOND LEG LENGTH | 0.260 INCHES NOMINAL | | STYLE DESIGNATOR | OFFSET DOUBLE ANGLE | | SURFACE TREATMENT | CHROMATE |
|
|