| ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.470 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.430 INCHES NOMINAL |
| FIRST LEG END WIDTH | 0.570 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 2.130 INCHES NOMINAL |
| FIRST LEG LENGTH | 3.060 INCHES NOMINAL |
| FIRST LEG STYLE | CHAMFERED ENDS |
| FIRST LEG WIDTH | 0.810 INCHES NOMINAL |
| FIRST LEG HOLE DIAMETER | 0.344 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| HOLE QUANTITY | 3 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/6 H323 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-250/7 H32 FED SPEC 2ND MATERIAL RESPONSE |
| MATERIAL THICKNESS | 0.125 INCHES NOMINAL |
| MATERIAL | ALUMINUM ALLOY 5083 OR ALUMINUM ALLOY 5086 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.380 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.312 INCHES NOMINAL |
| SECOND LEG END WIDTH | 0.380 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND LEG LENGTH | 4.250 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CHAMFERED ENDS |
| SECOND LEG HOLE DIAMETER | 0.190 INCHES MINIMUM AND 0.221 INCHES MAXIMUM |
| SECOND LEG WIDTH | 0.620 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT | PAINT |