| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.200 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.140 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.145 INCHES MINIMUM AND 0.151 INCHES MAXIMUM |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.250 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.032 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.460 INCHES NOMINAL |
| FIRST LEG WIDTH | 2.560 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-576,1/2 H FED SPEC ALL MATERIAL RESPONSES |
| MATERIAL | COPPER ALLOY 102 OR COPPER ALLOY 105 OR COPPER ALLOY 110 OR COPPER ALLOY 116 OR COPPER ALLOY 122 OR COPPER ALLOY 125 OR COPPER ALLOY |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.155 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.450 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 0.360 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.125 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.032 INCHES NOMINAL |
| SECOND LEG HOLE DIAMETER | 0.229 INCHES MINIMUM AND 0.239 INCHES MAXIMUM |
| SECOND LEG LENGTH | 0.530 INCHES NOMINAL |
| SECOND LEG WIDTH | 2.250 INCHES NOMINAL |
| SPECIAL FEATURES | FIRST LEG IS CUT OUT AT BEND; SIX MOUNTING HOLES EQUALLY SPACED AT 0.360 IN. ON SECOND LEG |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-T-10727 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | TIN |