| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.125 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.116 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.812 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.125 INCHES NOMINAL |
| FIRST LEG WIDTH | 1.062 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.438 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/9,T52 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6063 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.469 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.469 INCHES NOMINAL |
| SECOND LEG END RADIUS | 0.469 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | END RADIUS |
| SECOND LEG THICKNESS | 0.125 INCHES NOMINAL |
| SECOND LEG HOLE DIAMETER | 0.313 INCHES MINIMUM AND 0.318 INCHES MAXIMUM |
| SECOND LEG LENGTH | 0.781 INCHES NOMINAL |
| SECOND LEG WIDTH | 0.938 INCHES NOMINAL |
| SPECIAL FEATURES | HOLE IN SECOND LEG HAS TWO SLOTS 0.110 IN. W AND 0.105 IN. DP,IN LINE W/TWO SLOT ON PERIPHERY OF LEG SAME W CUT AT 30.0 DEG |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TY 1,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | ANODIZE |