|
|
|
National Stock Number:
5340-01-189-9985
Federal Supply Class:
5340
National Item Identification Number:
011899985
Description:
HINGE,BUTT
Detail:
A hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
|
Manufacturer Information:
| A-A-55590 | 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | A-A-55590-16D | 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | AA55590-16D | 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MS35822-16D | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| HINGE MOUNTING TYPE | FULL SURFACEFULL SURFACE | | KNUCKLE QUANTITY | 146146 | | KNUCKLE TYPE | FRICTIONFRICTION | | OVERALL LENGTH | 71.970 INCHES MINIMUM AND 71.970 INCHES MINIMUM AND 72.030 INCHES MAXIMUM72.030 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.036 INCHES MINIMUM AND 0.036 INCHES MINIMUM AND 0.044 INCHES MAXIMUM0.044 INCHES MAXIMUM | | MATERIAL | STEEL BODYSTEEL BODY | | MATERIAL | STEEL COMP 1010 OR STEEL COMP 1010 OR STEEL COMP 1020 PINSTEEL COMP 1020 PIN | | PERFORMANCE TYPE | NOT RATEDNOT RATED | | PIN DIAMETER | 0.089 INCHES MINIMUM AND 0.089 INCHES MINIMUM AND 0.093 INCHES MAXIMUM0.093 INCHES MAXIMUM | | PIN CENTER TO BODY EDGE DISTANCE | 0.969 INCHES MINIMUM AND 0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM1.031 INCHES MAXIMUM | | PIN REMOVABILITY | REMOVABLEREMOVABLE | | STYLE DESIGNATOR | BUTTBUTT |
|