| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| FIRST LEG THICKNESS | 5.0 MILLIMETERS NOMINAL |
| FIRST LEG LENGTH | 39.0 MILLIMETERS MINIMUM AND 41.0 MILLIMETERS MAXIMUM |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG WIDTH | 79.0 MILLIMETERS MINIMUM AND 81.0 MILLIMETERS MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | 1E357,CAGEC 11083 MFR REF SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 54.5 MILLIMETERS NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 10.5 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 30.0 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 12.7 MILLIMETERS NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 5.0 MILLIMETERS NOMINAL |
| SECOND LEG LENGTH | 54.0 MILLIMETERS MINIMUM AND 56.0 MILLIMETERS MAXIMUM |
| SECOND LEG WIDTH | 79.0 MILLIMETERS MINIMUM AND 81.0 MILLIMETERS MAXIMUM |
| SPECIAL FEATURES | FIRST LEG HAS AN UNDERCUT 22.5 PLUS OR MINUS 1.0 MM |
| STYLE DESIGNATOR | ANGLE |