| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.010 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.063 INCHES MINIMUM AND 0.067 INCHES MAXIMUM |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.200 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.080 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.040 INCHES NOMINAL |
| FIRST LEG WIDTH | 0.400 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.190 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-613,ALLOY 260,HALF HARD FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | COPPER ALLOY 260 |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.143 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.200 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.067 INCHES MINIMUM AND 0.071 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.187 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.040 INCHES NOMINAL |
| SECOND LEG WIDTH | 0.400 INCHES NOMINAL |
| SECOND LEG LENGTH | 0.460 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-T-10727,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | TIN |