| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.535 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL |
| FIRST LEG END WIDTH | 2.750 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | 2 SLOTS |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.250 INCHES NOMINAL |
| FIRST LEG SLOT LENGTH | 0.680 INCHES NOMINAL |
| FIRST LEG SLOT WIDTH | 0.406 INCHES NOMINAL |
| FIRST LEG STYLE | CHAMFERED ENDS |
| FIRST LEG THICKNESS | 0.125 INCHES NOMINAL |
| FIRST LEG LENGTH | 1.380 INCHES NOMINAL |
| FIRST LEG WIDTH | 3.250 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/7 AL 5086-H32 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-250/6 AL 5083-H323 FED SPEC 2ND MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 5086 OR ALUMINUM ALLOY 5083 |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.000 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.625 INCHES NOMINAL |
| SECOND LEG END WIDTH | 2.750 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CHAMFERED ENDS |
| SECOND LEG THICKNESS | 0.125 INCHES NOMINAL |
| SECOND LEG HOLE DIAMETER | 0.688 INCHES MINIMUM AND 0.719 INCHES MAXIMUM |
| SECOND LEG LENGTH | 1.500 INCHES NOMINAL |
| SECOND LEG WIDTH | 3.250 INCHES NOMINAL |
| SPECIAL FEATURES | SECOND LEG HOLE HAS KEYWAY 0.186 LG X 0.156 W PARALLEL TO WIDTH LH |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT | ENAMEL LUSTERLESS |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | TT-E-529 CR 24533 FED SPEC SINGLE TREATMENT RESPONSE |