| CENTER SECTION HEIGHT | 11.250 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.190 INCHES NOMINAL |
| CENTER SECTION WIDTH | 10.120 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.392 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.000 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | 2 SLOTS |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 4.000 INCHES NOMINAL |
| FIRST LEG LENGTH | 4.030 INCHES NOMINAL |
| FIRST LEG SLOT LENGTH | 0.310 INCHES MINIMUM AND 0.336 INCHES MAXIMUM |
| FIRST LEG SLOT WIDTH | 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM |
| FIRST LEG STYLE | EXTENDED FLAT |
| FIRST LEG THICKNESS | 0.190 INCHES NOMINAL |
| FIRST LEG WIDTH | 6.220 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/6 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 5083 |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.380 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | 3 SLOTS |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 4.500 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 4.500 INCHES NOMINAL |
| SECOND LEG LENGTH | 4.030 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT LENGTH | 0.430 INCHES MINIMUM AND 0.460 INCHES MAXIMUM |
| SECOND LEG SLOT WIDTH | 0.560 INCHES MINIMUM AND 0.680 INCHES MAXIMUM |
| SECOND LEG STYLE | EXTENDED FLAT |
| SECOND LEG THICKNESS | 0.190 INCHES NOMINAL |
| SECOND LEG WIDTH | 10.000 INCHES NOMINAL |
| STYLE DESIGNATOR | ADJACENT ANGLES |