| CENTER SECTION THICKNESS | 0.120 INCHES NOMINAL |
| CENTER SECTION WIDTH | 8.500 INCHES NOMINAL |
| FIRST LEG END WIDTH | 2.000 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 4.833 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.290 INCHES NOMINAL |
| FIRST LEG LENGTH | 3.240 INCHES NOMINAL |
| FIRST LEG OFFSET ANGLE | 16.0 DEGREES NOMINAL |
| FIRST LEG STYLE | ANGLE |
| FIRST LEG THICKNESS | 0.120 INCHES NOMINAL |
| FIRST LEG HOLE DIAMETER | 0.420 INCHES NOMINAL |
| FIRST LEG WIDTH | 2.780 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-698 QA COMMERCIAL FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| MOUNTING HOLE TYPE | PLAIN AND THREADED |
| SPECIAL FEATURES | CENTER SECTION WEDGE-SHAPE 0.062 TO 3.000 HIGH; FIRST LEG HOLES ARE ON STRAP 10884373 W/NUTS MS27128-5 |
| REINFORCEMENT METHOD | GUSSET |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.750 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.120 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG CORNER RADIUS | 0.500 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 7.000 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.750 INCHES NOMINAL |
| SECOND LEG LENGTH | 3.380 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CORNER RADIUS |
| SECOND LEG THICKNESS | 0.120 INCHES NOMINAL |
| SECOND LEG HOLE DIAMETER | 0.281 INCHES NOMINAL |
| SECOND LEG WIDTH | 8.500 INCHES NOMINAL |
| STYLE DESIGNATOR | OFFSET DOUBLE ANGLE |