| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.300 INCHES MINIMUM AND 0.360 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.740 INCHES MINIMUM AND 0.800 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG STYLE | SQUARE AND TAPERED |
| FIRST LEG THICKNESS | 0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM |
| FIRST LEG WIDTH | 1.510 INCHES MINIMUM AND 1.570 INCHES MAXIMUM |
| FIRST LEG HOLE DIAMETER | 0.191 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5,ALCLAD T3 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 2024 |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.330 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.330 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.098 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.880 INCHES NOMINAL |
| SECOND LEG STYLE | SQUARE AND TAPERED |
| SECOND LEG THICKNESS | 0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM |
| SECOND LEG LENGTH | 0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM |
| SECOND LEG WIDTH | 1.510 INCHES MINIMUM AND 1.570 INCHES MAXIMUM |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | ANODIZE |