|
|
|
National Stock Number:
5340-01-095-0403
Federal Supply Class:
5340
National Item Identification Number:
010950403
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 16D712-31 | 81755 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 1.250 INCHES NOMINAL | | CENTER SECTION WIDTH | 0.500 INCHES NOMINAL | | FABRICATION METHOD | MACHINED | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG STYLE | SQUARE | | FIRST LEG WIDTH | 0.500 INCHES NOMINAL | | FIRST LEG HOLE DIAMETER | 0.250 INCHES MINIMUM AND 0.258 INCHES MAXIMUM | | FIRST LEG LENGTH | 0.620 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.310 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | SQUARE | | SECOND LEG WIDTH | 0.500 INCHES NOMINAL | | SECOND LEG HOLE DIAMETER | 0.191 INCHES MINIMUM AND 0.199 INCHES MAXIMUM | | SECOND LEG LENGTH | 0.750 INCHES NOMINAL | | SPECIAL FEATURES | PRESS CLIP ON FIRST LEG | | STYLE DESIGNATOR | DOUBLE ANGLE |
|
|