5340-01-089-5746, CLAMP,BLOCK

National Stock Number:
5340-01-089-5746

Federal Supply Class:
5340

National Item Identification Number:
010895746

Description:
CLAMP,BLOCK

Detail:
A SQUARE OR RECTANGULAR MULTIPIECE ITEM DESIGNED TO BE ATTACHED TO ANOTHER OBJECT OR STRUCTURE. IT MUST HAVE ONE OR MORE HOLES DESIGNED TO SURROUND AND SECURELY GRIP ITEMS SUCH AS ELECTRICAL CABLES, CONDUITS, PIPES, TUBES AND/OR HOSES. IT MAY HAVE ONE OR MORE HOLES DESIGNED TO PREVENT SNAGGING OR CHAFING AND PROVIDE SUPPORT AND/OR GUIDANCE TO MOVING CABLE PASSING THROUGH IT. IT MAY HAVE AN INTEGRAL CLAMPING FEATURE. FOR ITEMS SPECIFICALLY DESIGNED TO SERVE AS A GUIDE, SEE FAIRLEAD, BLOCK AND FAIRLEAD SECTION, BLOCK. EXCLUDES BRACKET, PIPE.

Manufacturer Information:

3H10339-101

98897

LOCKHEED MARTIN CORP

Techincal Specification:

DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH	0.250 INCHES NOMINAL0.250 INCHES NOMINAL
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER	0.370 INCHES NOMINAL
DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER	0.810 INCHES NOMINAL
BLOCK HEIGHT	0.380 INCHES NOMINAL0.380 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN FIRST AND FIFTH CLAMPING HOLES	2.750 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN FIRST AND FOURTH CLAMPING HOLES	1.880 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES	0.820 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES	1.870 INCHES NOMINAL1.870 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD CLAMPING HOLES	1.380 INCHES NOMINAL
CLAMPING HOLE QUANTITY	55
CLAMPING HOLE DIAMETER	0.249 INCHES MINIMUM AND 0.255 INCHES MAXIMUM FIRST HOLE
CLAMPING HOLE DIAMETER	0.374 INCHES MINIMUM AND 0.381 INCHES MAXIMUM ALL HOLES
OVERALL HEIGHT	0.760 INCHES NOMINAL0.760 INCHES NOMINAL
OVERALL LENGTH	3.490 INCHES NOMINAL3.490 INCHES NOMINAL
OVERALL WIDTH	0.500 INCHES NOMINAL0.500 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-P-15035 TY FBE MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL	PLASTIC AND COTTON
MOUNTING FACILITY	UNTHREADED HOLE(S)UNTHREADED HOLE(S)
MOUNTING HOLE DIAMETER	0.193 INCHES MINIMUM AND 0.193 INCHES MINIMUM AND 0.199 INCHES MAXIMUM0.199 INCHES MAXIMUM
MOUNTING HOLE QUANTITY	22
STYLE DESIGNATOR	RECTANGULAR

Click here to Register for Free 30-day Trial