5340-01-027-4074, BRACKET,DOUBLE ANGLE

National Stock Number:
5340-01-027-4074

Federal Supply Class:
5340

National Item Identification Number:
010274074

Description:
BRACKET,DOUBLE ANGLE

Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.

Manufacturer Information:

8436991

19204

ARMY, UNITED STATES DEPARTMENT OF THE

Techincal Specification:

CENTER SECTION HEIGHT	3.290 INCHES MINIMUM AND 3.330 INCHES MAXIMUM
CENTER SECTION THICKNESS	0.100 INCHES NOMINAL
CENTER SECTION WIDTH	4.980 INCHES MINIMUM AND 5.020 INCHES MAXIMUM
FABRICATION METHOD	WROUGHT
FIRST LEG ANGLE	90.0 DEGREES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.580 INCHES MINIMUM AND 0.660 INCHES MAXIMUM
FIRST LEG HOLE ARRANGEMENT STYLE	TWO HOLES
FIRST LEG HOLE DIAMETER	0.285 INCHES MINIMUM AND 0.300 INCHES MAXIMUM
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH	3.750 INCHES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM
FIRST LEG STYLE	SQUARE
FIRST LEG THICKNESS	0.100 INCHES NOMINAL
FIRST LEG WIDTH	4.980 INCHES MINIMUM AND 5.020 INCHES MAXIMUM
FIRST LEG LENGTH	1.140 INCHES MINIMUM AND 1.200 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/11,T6 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL	ALUMINUM ALLOY 6061
SPECIAL FEATURES	BODY HAS 3 HOLES STYLE 139 0.285/0.300 DIA 3.090 ALONG LENGTH C-TO-C 1.860 C-TO-C ALONG WIDTH AND 1.860 C-TO-C ALONG WIDTH 0.620/0.700 FROM BOTTOM EDGE TO LOWER HOLE CENTER 0.700/0.740 LEFT EDGE TO HOLE CENTER
SECOND LEG ANGLE	270.0 DEGREES NOMINAL
SECOND LEG HOLE ARRANGEMENT STYLE	TWO HOLES
SECOND LEG HOLE DIAMETER	0.3000 INCHES NOMINAL
SECOND LEG LENGTH	1.140 INCHES MINIMUM AND 1.200 INCHES MAXIMUM
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH	3.7500 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.9500 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.6300 INCHES NOMINAL
SECOND LEG THICKNESS	0.100 INCHES NOMINAL
SECOND LEG WIDTH	5.0200 INCHES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG	IDENTICAL
SECOND LEG STYLE	SQUARE
STYLE DESIGNATOR	DOUBLE ANGLE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE
SURFACE TREATMENT	ENAMEL

Click here to Register for Free 30-day Trial