|
|
|
National Stock Number:
5340-00-982-3601
Federal Supply Class:
5340
National Item Identification Number:
009823601
Description:
HINGE,BUTT
Detail:
A hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
|
Manufacturer Information:
| MS20257-3-1100 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS20257-3-1487 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS20257-3-1600 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS20257-3-1650 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS20257-3-1900 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS20257-3-4800 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS20257-3-7200 | 03007 | H. A. GUDEN COMPANY, INC. | | MS20257-3-7200 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS20257Y3-1500 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| HINGE MOUNTING TYPE | FULL SURFACE | | KNUCKLE QUANTITY | 144 | | KNUCKLE TYPE | FRICTION | | MATERIAL AND LOCATION | ALUMINUM ALLOY, QQ-A-250/8, ALLOY 5052, H24 BODY ERR-100 ERR-100 AND ALUMINUM ALLOY, QQ-A-250/8, ALLOY 5052, H34 BODY ERR-100 ERR-100 | | MATERIAL AND LOCATION | STEEL, CORROSION RESISTING PIN ERR-100 ERR-100 | | MATERIAL THICKNESS | 0.040 INCHES NOMINAL | | PERFORMANCE TYPE | NOT RATED | | PIN CENTER TO BODY EDGE DISTANCE | 0.625 INCHES NOMINAL | | PIN DIAMETER | 0.092 INCHES MINIMUM AND 0.100 INCHES MAXIMUM | | PIN REMOVABILITY | REMOVABLE | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 72.000 INCHES NOMINAL | | REVERSIBLE FEATURE | NOT INCLUDED | | RISING PIN | NOT INCLUDED | | STYLE DESIGNATOR | BUTT | | SURFACE TREATMENT AND LOCATION | CADMIUM PIN |
|
|