|
|
|
National Stock Number:
5340-00-924-3993
Federal Supply Class:
5340
National Item Identification Number:
009243993
Description:
PLATE,MOUNTING
Detail:
A metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
|
Manufacturer Information:
| 10120911-9 | 09205 | LOCKHEED MARTIN CORP ELECTRONICS AND MISSILES DIV | | 10120911-9 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND |
|
Techincal Specification:
| LENGTH | 6.970 INCHES MINIMUM AND 7.030 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 | | MOUNTING HOLE DIAMETER | | | MOUNTING HOLE QUANTITY | 8 | | MOUNTING HOLE TYPE | THREADED | | SHAPE | RECTANGULAR | | SPECIAL FEATURES | MOUNTING CONFIGURATION: THERE ARE FOUR HOLES WITH TWO AT EACH END AND THEY ARE LOCATED 0.310 INCHES WITH A VARATION OF PLUS OR MINUS 0.030 INCHES AND1.000 INCH BETWEEN BSC ALONG THE WIDTH,THE TWO HOLES AT EACH END HAVE 6.735 INCHES BETWEEN BSC; THE FOUR HOLES IN LINE ARE LOCATED 1.000 INCH BSC FROM THESIDE AND 0.500 INCH BSC FROM FOUR HOLES IN LINE AND TWO HOLES AT EACH END,THEFIRST HOLE IS 0.988 INCHES BSC FROM LEFT END HOLES,THE SECOND HOLE IS 2.588 INCHES BSC FROM LEFT END HOLES,THE THIRD HOLE IS 4.188 INCHES BSC FROM LEFT END HOLES,THE FOURTH HOLE IS 5.488 INCHES BSC FROM LEFT END HOLES; THE HOLES ARE ALL CSK 100 DEGREES TO A DIAMETER OF 0.337 INCHES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625, TY 2, CL 1 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | ANODIZE | | THICKNESS | 0.100 INCHES NOMINAL | | WIDTH | 1.970 INCHES MINIMUM AND 2.030 INCHES MAXIMUM |
|
|