|
|
|
National Stock Number:
5340-00-924-3962
Federal Supply Class:
5340
National Item Identification Number:
009243962
Description:
PLATE,MOUNTING
Detail:
A metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
|
Manufacturer Information:
| 10120911-2 | 09205 | LOCKHEED MARTIN CORP ELECTRONICS AND MISSILES DIV | | 10120911-2 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND |
|
Techincal Specification:
| LENGTH | 6.970 INCHES MINIMUM AND 7.030 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 | | MOUNTING HOLE DIAMETER | | | MOUNTING HOLE QUANTITY | 8 | | MOUNTING HOLE TYPE | UNTHREADED | | SHAPE | RECTANGULAR | | SPECIAL FEATURES | MOUNTING CONFIGURATION: THERE ARE TWO HOLES AT EACH END OF PIECE LOCATED00.310 INCHES WITH A VARIATION OF PLUS OR MINUS 0.030 INCHES FROM ENDS,THE SET OF TWO HOLES AT THE ENDS ARE LOCATED 6.375 INCHES FROM BSC ALONG THE LENGTHAND 1.000 INCES BSC ALONG THE WIDTH; THE FIRST HOLE IS LOCATED 0.988 INCHES FROM LEFT END BSC HOLES,THE SECOND HOLE IS LOCATED 2.388 INCHES FROM LEFT END HOLES BSC,THE THIRD HOLE IS LOCATED 3.588 INCHES FROM LEFT END HOLES BSC,THE FOURTH HOLE IS LOCATED 5.188 INCHES FROM LEFT END HOLES BSC; THE FOUR HOLES ARE LOCATED 1.000 INCH FROM THE SIDE OF PIECE AND 0.500 INCHES FROM END HOLES BSC; ALL HOLES HAVE A DIA. OF 0.180 INCHES WITH A VARIATION OF PLUS 0.005 ANDMINUS 0.001 INCHES AND CSK 100 DEGREES WITH DIA. OF 0.337 INCHES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625, TY 2, CL 1 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | ANODIZE | | THICKNESS | 0.100 INCHES NOMINAL | | WIDTH | 1.970 INCHES MINIMUM AND 2.030 INCHES MAXIMUM |
|
|