|
|
|
National Stock Number:
5340-00-904-3342
Federal Supply Class:
5340
National Item Identification Number:
009043342
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 130528 | 3B4M0 | LUCENT TECHNOLOGIES INC CORPORATE HEADQUARTERS | | 130528 | 64959 | AMERICAN TELEPHONE AND TELEGRAPH CO | | 130528 | 70408 | AT AND T CORP |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 0.562 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.094 INCHES NOMINAL | | CENTER SECTION WIDTH | 0.375 INCHES NOMINAL | | FABRICATION METHOD | STAMPED | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.188 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.188 INCHES NOMINAL | | FIRST LEG END RADIUS | 0.188 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | FIRST LEG HOLE DIAMETER | 0.128 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG STYLE | END RADIUS | | FIRST LEG THICKNESS | 0.094 INCHES NOMINAL | | FIRST LEG WIDTH | 0.375 INCHES NOMINAL | | FIRST LEG LENGTH | 0.406 INCHES NOMINAL | | HEAT TREATMENT | ANNEALED | | MATERIAL | STEEL CORROSION RESISTING | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.188 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.188 INCHES NOMINAL | | SECOND LEG END RADIUS | 0.188 INCHES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.250 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | END RADIUS | | SECOND LEG THICKNESS | 0.094 INCHES NOMINAL | | SECOND LEG WIDTH | 0.375 INCHES NOMINAL | | SECOND LEG HOLE DIAMETER | 0.128 INCHES NOMINAL | | SECOND LEG LENGTH | 0.656 INCHES NOMINAL | | STYLE DESIGNATOR | DOUBLE ANGLE | | SURFACE TREATMENT | PASSIVATE | | SPECIAL FEATURES | TWO 0.062 IN. DIA PLAIN HOLES IN SECTION BETWEEN FIRST AND SECOND LEG.FIRST HOLE CENTER 0.281 IN. VERTICAL FROM FIRST LEG. SECOND HOLE CENTER0.453 IN. VERTICAL FROM FIRST LEG,0.125 IN. FROM EDGE TO HOLE CENTERS ALONGWIDTH |
|
|