| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.797 INCHES MINIMUM AND 0.828 INCHES MAXIMUM |
| FIRST LEG END WIDTH | 5.901 INCHES MINIMUM AND 5.911 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| FIRST LEG HOLE DIAMETER | 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 2.245 INCHES MINIMUM AND 2.255 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 2.245 INCHES MINIMUM AND 2.255 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.422 INCHES MINIMUM AND 0.453 INCHES MAXIMUM |
| FIRST LEG STYLE | ANGLE |
| FIRST LEG THICKNESS | 0.086 INCHES MINIMUM AND 0.094 INCHES MAXIMUM |
| FIRST LEG LENGTH | 1.234 INCHES MINIMUM AND 1.266 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/8,H32 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 5052 |
| SECOND LEG LENGTH | 0.828 INCHES MINIMUM AND 0.859 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.086 INCHES MINIMUM AND 0.094 INCHES MAXIMUM |
| SPECIAL FEATURES | FURNISHED WITH THREE NUTS,SELF-LOCKING,PLATE AND SIX RIVETS |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT | ANODIZE |