| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.184 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.201 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.086 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.937 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.050 INCHES NOMINAL |
| FIRST LEG WIDTH | 1.340 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.440 INCHES NOMINAL |
| HEAT TREATMENT | H-32 STRAIN HARDENED |
| MATERIAL | ALUMINUM ALLOY 5052 |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.097 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.375 INCHES NOMINAL |
| SECOND LEG END RADIUS | 0.375 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG LENGTH | 0.363 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG LENGTH | 0.960 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | END RADIUS |
| SECOND LEG THICKNESS | 0.050 INCHES NOMINAL |
| SECOND LEG HOLE DIAMETER | 0.250 INCHES NOMINAL |
| SECOND LEG LENGTH | 1.672 INCHES NOMINAL |
| SECOND LEG WIDTH | 0.750 INCHES NOMINAL |
| SPECIAL FEATURES | FIRST HOLE 0.193 DIA AND 3 HOLES 0.156 DIA 0.843 FROM C/L FIRST HOLE IST AND 3RD SMALL HOLES0.141 C/L 2ND |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 TY 1 GR C CL 1 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | OXIDE FILM |